Hesston/MF Baler Parts We manufacture and provide high quality add-on and repair parts for all Hesston/Massey Ferguson big square balers.

Contact Us

Browse Hesston/MF Baler Parts


  All of our replacement baler parts either meet or exceed the OEM specifications.

  Many of our parts are problem-solving or add-on parts that significantly improve the performance and reliability of your baler.

Learn more about our Baler Parts below!

Packer Crank Update Kit

  • Same segmented Packer Crank design that is used on the 2100 and 2200 series MF balers.
  • Longer life, lower maintenance, and better serviceability.
  •   FITMENT
  • Hesston – 4750, 4755, 4760, 4790, 4900, 4910
  • Case IH – 8570, 8575, 8580, 8585, 8590

Double Cam Reel Kit

  • Converting your single cam reel to our double cam reel will give you a smoother running pickup. The double cam and the two-piece tine bar design is stronger and less problematic.
  • Two piece tine bars w/ center support bearings.
  • Cam track and cam followers for left and right side.
  • Template Included to modify left side of pickup frame to accept cam track.
  • Includes a full set of tines.
  •   FITMENT
  • Hesston – 4750, 4755, 4900, early 4910
  • Case IH – 8570, 8575, 8580, early 8590

Five-Bar Reel Kit

  • Adding an additional tine bar to the pickup reel Improves the balers ability to pick up crop, especially with light windrows and high ground speeds. Our five Bar Reel Kit includes everything needed to convert your four bar reel to a five bar.
  •   FITMENT
  • Massey Ferguson – 2150, 2170, 2170XD, 2190, 2250, 2270, 2270XD, 2290
  • AGCO – 7433, 7434, 7444, 2150, 2170, 2190
  • Challenger – LB33-B, LB34-B, LB34-BXD, LB44-B, 2250, 2270, 2270XD, 2290

Knotter Blower Kit

  • Made for balers that didn’t come from the factory with a knotter blower. The knotter blower will keep the knotter area free from crop buildup for less miss ties.
  •   FITMENT
  • Hesston – 4750, 4755, 4760, 4790, 4900, 4910
  • Case IH – 8570, 8575, 8580, 8585, 8590

Twine Tube Kits

  • Keeps twine from running off the side of the tensioner rollers. Tube guides twine all the way up to the rollers.
  • Bracket bolt on under tensioner springs.
  •   FITMENT
  • Hesston – 4750, 4755, 4760, 4790, 4900, 4910
  • Case IH – 8570, 8575, 8580, 8585, 8590
  • Massey Ferguson – 2150, 2170, 2170XD, 2190, 2250, 2270, 2270XD, 2290
  • AGCO – 7333, 7430, 7433, 7434, 7444, 2150, 2170, 2190
  • Challenger – LB33, LB34, LB44, LB33-B, LB34-B, LB34-BXD, LB44-B, 2250, 2270, 2270XD, 2290
Twine Tube Kits 1 Twine Tube Kits 2 Twine Tube Kits 3

Complete Pickup Assembly

  • We sell fully assembled pickup assemblies for the 2100 and 2200 series MF balers.
  •   FITMENT
  • Massey Ferguson – 2150, 2170, 2170XD, 2190, 2250, 2270, 2270XD, 2290
  • AGCO – 7433, 7434, 7444, 2150, 2170, 2190
  • Challenger – LB33-B, LB34-B, LB34-BXD, LB44-B, 2250, 2270, 2270XD, 2290

Complete Packer Crank Assembly

  • We sell complete packer crank assemblies for the 2100 and 2200 series AGCO 3X4 and 4X4 balers.
  •   FITMENT
  • Massey Ferguson – 2170, 2170XD, 2190, 2270, 2270XD, 2290
  • AGCO – 7434, 7444, 2170, 2190
  • Challenger – LB34-B, LB34-BXD, LB44-B, 2270, 2270XD, 2290

Perforated Feeder Pans

  • Installing a perforated feeder pan or feeder screen, allows dirt and rocks to fall through before the crop enters into the pre-forming chamber. This helps prevent stuffer trip door jamming, build up in the compression chamber, and unwanted material in the finished bale.
  •   FITMENT
  • Hesston – 4750, 4755, 4760, 4790, 4900, 4910
  • Case IH – 8570, 8575, 8580, 8585, 8590
  • Massey Ferguson – 2150, 2170, 2170XD, 2190, 2250, 2270, 2270XD, 2290
  • AGCO – 7333, 7430, 7433, 7434, 7444, 2150, 2170, 2190
  • Challenger – LB33, LB34, LB44, LB33-B, LB34-B, LB34-BXD, LB44-B, 2250, 2270, 2270XD, 2290
Perforated Feeder Pans

Improved Twine Finger Rods & Bolt-on Rod Ends

  • Heat treated twine finger rod that is more resistant to bending.
  • The stable connection created by our twine finger rods and bolt-on rod ends, makes for finer adjustment, less wear, and fewer miss ties.
  •   FITMENT
  • Hesston – 4750, 4755, 4760, 4790, 4900, 4910
  • Case IH – 8570, 8575, 8580, 8585, 8590
  • Massey Ferguson – 2150, 2170, 2170XD, 2190, 2250, 2270, 2270XD, 2290
  • AGCO – 7333, 7430, 7433, 7434, 7444, 2150, 2170, 2190
  • Challenger – LB33, LB34, LB44, LB33-B, LB34-B, LB34-BXD, LB44-B, 2250, 2270, 2270XD, 2290
Improved Twine Finger Rods & Bolt-on Rod Ends Improved Twine Finger Rods & Bolt-on Rod Ends Improved Twine Finger Rods & Bolt-on Rod Ends

Twine Finger w/ Bearing

  • The old style twine fingers that use a bushing to pivot on, wear out quickly. We offer twine fingers with a sealed bearing in place of the bushing, that bolt right on using the existing hardware.
  •   FITMENT
  • Hesston – 4750, 4755, 4760, 4790, 4900, 4910
  • Case IH – 8570, 8575, 8580, 8585, 8590
  • AGCO – 7333, 7430
  • Challenger – LB33, LB34, LB44
Twine Finger w/ Bearing

Plastic Slides

  • Fills the lower corners along the length of the bale chamber and creates a level surface from the stationary hay dogs to the rear of the chamber. Our plastic slides prevent the buildup of material that typically occurs when baling corn stover. Build up in the chamber corners effects the shape of the lower corners of the bale, and can cause issues when stacking.
  •   FITMENT
  • Massey Ferguson – 2170, 2170XD, 2190, 2270, 2270XD, 2290
  • AGCO – 7434, 7444, 2170, 2190
  • Challenger – LB34-B, LB34-BXD, LB44-B, 2270, 2270XD, 2290
Plastic Slides Plastic Slides

Hard-Faced Packer Crank Fingers

  • Contact face has hard surfacing applied for better wear and longer life.
  •   FITMENT
  • Massey Ferguson – *2150, *2170, *2170XD, *2190, 2250, 2270, 2270XD, 2290
  • AGCO – *7433, *7434, *7444, *2150, *2170, *2190
  • Challenger – *LB33-B, *LB34-B, *LB34-BXD, *LB44-B, 2250, 2270, 2270XD, 2290
  • *Hard-Faced option not available for early model 2100 series MF balers or equivalent.
Hard-Faced Packer Crank Fingers Hard-Faced Packer Crank Fingers

Heavy Duty Square Pickup Tines

  • Our heavy duty square pickup tines are made with square rod rather than round. The square tines are more durable and the square rod is better at pulling in the crop.
  •   FITMENT
  • Hesston – 4550, 4570, 4590, 4650, 4655, 4690, 4760, 4790, 4900, 4910
  • Case IH – 8520, 8530, 8545, 8550, 8555, 8580, 8585, 8590
  • Massey Ferguson – 1835, 1836, 1837, 1838, 1839, 1840, 1841, 1842, 2150, 2170, 2170XD, 2190, 2250, 2270, 2270XD, 2290
  • AGCO – 2150, 2170, 2190, 7105, 7110, 7115, 7120, 7333, 7430, 7433, 7434, 7444
  • Challenger – LB33, LB34, LB44, LB33-B, LB34-B, LB34-BXD, LB44-B, 2250, 2270, 2270XD, 2290, $B34, $B36, $B44
Square Pickup Tines Square Pickup Tines

Replacement Stuffer Crank Shaft

  • Instead of having to replace the complete clutch arm when damage to the shaft occurs, we can provide you with a replacement shaft. The replacement shaft can be welded into your existing clutch arm.
  •   FITMENT
  • Massey Ferguson – 2150, 2170, 2170XD, 2190, *2250, *2270, *2270XD, *2290
  • AGCO – 7433, 7434, 7444, 2150, 2170, 2190
  • Challenger – LB33-B, LB34-B, LB34-BXD, LB44-B, *2250, *2270, *2270XD, *2290
  • *Does Not fit late model 2200 series balers SN: GHB and later
Replacement Stuffer Crank Shaft Replacement Stuffer Crank Shaft

Replacement Wrapper Tab

  • Replacement wrapper tabs that can be welded onto the pickup reel frame in the event that a tab breaks off or is damaged beyond repair.
  •   FITMENT
  • Massey Ferguson – 2150, 2170, 2170XD, 2190, 2250, 2270, 2270XD, 2290
  • AGCO – 7433, 7434, 7444, 2150, 2170, 2190
  • Challenger – LB33-B, LB34-B, LB34-BXD, LB44-B, 2250, 2270, 2270XD, 2290
Replacement Wrapper Tab

Heavy Upper Slacker Spring

  • Spring for the upper slackers with 50% more spring rate. The increased spring rate is especially benificial when running heavier twines.
  •   FITMENT
  • Hesston – 4750, 4755, 4760, 4790, 4900, 4910,
  • Case IH – 8570, 8575, 8580, 8585, 8590
  • Massey Ferguson – 2150, 2170, 2170XD, 2190, 2250, 2270, 2270XD, 2290
  • AGCO – 7333, 7430, 7433, 7434, 7444, 2150, 2170, 2190
  • Challenger – LB33, LB34, LB44, LB33-B, LB34-B, LB34-BXD, LB44-B, 2250, 2270, 2270XD, 2290
Heavy Upper Slacker Spring

Cat 4 Hitch Kits

  • Our Cat 4 hitch kit has everything you need to connect your baler with to a John Deere tractor with the Category 4 drawbar.
  •   FITMENT
  • Hesston – 4900, 4910, 4760, 4790
  • Case IH – 8580, 8585, 8590
  • Massey Ferguson – 2150, 2170, 2170XD, 2190
  • AGCO – 7333, 7430, 7433, 7434, 7444, 2150, 2170, 2190
  • Challenger – LB33, LB34, LB44, LB33-B, LB34-B, LB34-BXD, LB44-B
Cat 4 Hitch Kits

3x3 Hitch Update Kit

  • Updates early 3x3 baler hitches to the more robust ball design found on the Hesston 4760 balers. Includes weld on hitch plate, straps, bushings, ball, rings, shims, and hitch bolt.
  •   FITMENT
  • Hesston – 4750, 4755
  • Case IH – 8570, 8575
3x3 Hitch Update Kit 3x3 Hitch Update Kit

Rasppe Knotter Heads

  • Direct replacement for all AGCO big square baler knotter heads.
  • Direct replacement for AGCO small square balers with factory installed rasppe knotters.
  • Tight tolerances
  • Chromatized or galvanized parts for longer service life
  • Customer proven to perform better than oem at a fraction of the cost
  •   FITMENT / BIG SQUARE BALERS
  • Hesston – 4750, 4755, 4760, 4790, 4900, 4910
  • Case IH – 8570, 8575, 8580, 8585, 8590
  • Massey Ferguson - 2150, 2170, 2170XD, 2190, 2250, 2270, 2270XD, 2290
  • AGCO – 7333, 7430, 7433, 7434, 7444, 2150, 2170, 2190
  • Challenger – LB33, LB34, LB44, LB33-B, LB34-B, LB34-BXD, LB44-B, 2250, 2270, 2270XD, 2290
  •   FITMENT / SMALL SQUARE BALERS
  • Hesston – 4655, 4690, 4690s
  • Massey Ferguson – 1841, 1842, 1843N, 1843S, 1844N, 1844S
  • AGCO – 1841, 7120
  • Challenger – 1842, SB44
Rasppe Knotter Heads Rasppe Knotter Heads Rasppe Knotter Heads Rasppe Knotter Heads Rasppe Knotter Heads

Stuffer Arm Cam Bearing Mount Repair Kit

  • Weld in bearing mount plates to replace worn, oversized bearing stud hole.
  •   FITMENT
  • Hesston – Late SN 4750, 4755
  • Case IH – Late SN 8570, 8575
Stuffer Arm Cam Bearing Mount Repair Kit Stuffer Arm Cam Bearing Mount Repair Kit Stuffer Arm Cam Bearing Mount Repair Kit

First Generation Baler ISO Conversion Kit

  • ISO electronic conversion kit for all Dynalco® controlled large square balers.
  • Easy installation using existing main harness.
  •   FITMENT
  • Hesston – 4750, 4755, 4760, 4790, 4900, 4910
  • Case IH – 8570, 8575, 8580, 8585, 8590
  • AGCO – 7333, 7430
  • Challenger – LB33, LB34, LB44
Stuffer Arm Cam Bearing Mount Repair Kit