Maize Corporation

5820 N. 119TH W. MAIZE, KS 67101
888.722.8710

Cutter Head

Cutter head

Label Maize Part No. John Deere Part No. Description Qty Required Link
1 57053M AZ57053 48 Knife cutter head with tapered or straight shaft. It has 3/4" end plates with two 1/2" plates inside the drum, all knife mounts are supported to prevent cracking. The unit is fully assembled and ready to install. Choice of knives (63136M or 69500M) adjusted with bolts torqued to specs. Add tungsten carbide to the face of the knife mount angle 1/16" x 1-1/4". Add tungsten carbide to complete face of the knife mount angle. Add 63136MS super corn knife with extra tungsten. Add 69500M super grass knife with extra tungsten. Add heavy duty 6 groove pulley with taper lock hub. Add heavy duty 7 groove pulley with taper lock hub. 1 View Part » 
2 57054M AZ57054 40 Knife cutter head with tapered or straight shaft. It has 3/4" end plates with two 1/2" plates inside the drum, all knife mounts are supported to prevent cracking. The unit is fully assembled and ready to install. Choice of knives (63136M or 69500M) adjusted with bolts torqued to specs. Add tungsten carbide to the face of the knife mount angle 1/16" x 1-1/4". Add tungsten carbide to complete face of mount. Add 63136MS super corn knife with extra tungsten. Add 69500M super grass knife with extra tungsten. Add heavy duty 6 groove pulley with taper lock hub. Add heavy duty 7 groove pulley with taper lock hub. 1 View Part » 
2A 57052M N/A 36 knife cutter head with tapered or straight shaft. It has 3/4" end plates with two 1/2" plates inside the drum to prevent cracking of the drum center. Unit is fully assembled and ready to install. Choice of knives (63136M or 69500M)adjusted with bolts torqued to specs. Add tungsten carbide on complete face of knife mount angle. Add 63136MS super corn knife with extra tungsten. Add 69500M super grass knife with extra tungsten. Add heavy duty 6 groove pulley (12937M) with taper lock hub. Add heavy duty 7 groove pulley (12542M) with taper lock hub 1 View Part » 
3 43581M AZ43581 Coupling sprocket, 28 tooth for straight splined cutter head shaft 1 View Part » 
4 71139M AZ71139 Tapered/splined shaft, coupling, heat treated, used on cutter head shaft w/o spline, late 6850 and 7000 series 1 View Part » 
5 64796M AZ64796 Coupling sprocket, 28 tooth for shafts w/o straight shaft spline used with part #71387M, installed 1 View Part » 
6 101898M AZ101898 Coupling sprocket, 42 tooth, to be used with larger heads, bolts directly to cutter head shaft w/o spline 1 View Part » 
7 53905M AZ53905 Cutter bar, grass, 36mm, heat treated, tungsten carbide SN 504342 and above, 6650-6950/7200-7500 1 View Part » 
8 53906M AZ53906 Cutter bar, corn, 36MM, heat treated, tungsten carbide SN 504342 and above, 6650-6950/7200-7500 1 View Part » 
9 47613M AZ47613 Cutter bar, grass, 1" thick, heat treated, tungsten carbide 1 View Part » 
10 47614M AZ47614 Cutter bar, corn, 1" thick, heat treated, tungsten carbide 1 View Part » 
11 49449M AZ49449 Wear kit, cutter bar, all 6000/7200-7500 1 View Part » 
12 53747M AZ53747 Sharpening stone, SN 504991 and below, early 6950 1 View Part » 
13 56005M AZ56626 Sharpening stone, SN 504992 and above, late 6950, 7200-7500, guaranteed quality 1 View Part » 
14 69650M Z69650 Knife bolt, wide head, metric grade 12.9, strongest bolt on the market, all 6000/7200-7500 120/144 View Part » 
15 60535M Z60535 Top strap, 1/4" heat treated, 6000/7200-7500 32/40/48 View Part » 
16 63136M Z63136 Corn knife, heat treated, tungsten carbide, 6000/7200-7500 32/40/48 View Part » 
16A 63136MS Z63136 Super corn knife, heat treated, thicker and higher grade of tungsten carbide than others, all 6000/7200-7500 32/40/48 View Part » 
17 69500M N/A Grass knife, 3/8" longer, will have more contact with knife mount bracket front to rear, 6000/7200-7500 32/40/48 View Part » 
17A 69500MS N/A Super grass knife, 3/8" longer, tungsten carbide, longer life 32/40/48 View Part » 
18 49624M Z49624 Knife mount angle, 5000/7200-7500 A/R View Part » 
19 71196M Z71196 Nut, knife bolt, cold roll steel, heat treated, 6000/7200-7500 32/40/48 View Part » 
[profiler]
Memory usage: real: 19922944, emalloc: 19771920
Code ProfilerTimeCntEmallocRealMem